shafi_banner

Bututun Scaffolding Mai Zafi da aka tsoma a cikin Galvanized | OD 48.3mm x 3.2mm | ASTM A53/EN 39 Standard

Bututun Scaffolding Mai Zafi | OD 48.3mm x 3.2mm | ASTM A53/EN 39 Hoton da Aka Fi So
  • Bututun Scaffolding Mai Zafi da aka tsoma a cikin Galvanized | OD 48.3mm x 3.2mm | ASTM A53/EN 39 Standard
  • Bututun Scaffolding Mai Zafi da aka tsoma a cikin Galvanized | OD 48.3mm x 3.2mm | ASTM A53/EN 39 Standard
  • Bututun Scaffolding Mai Zafi da aka tsoma a cikin Galvanized | OD 48.3mm x 3.2mm | ASTM A53/EN 39 Standard
  • Bututun Scaffolding Mai Zafi da aka tsoma a cikin Galvanized | OD 48.3mm x 3.2mm | ASTM A53/EN 39 Standard
  • Bututun Scaffolding Mai Zafi da aka tsoma a cikin Galvanized | OD 48.3mm x 3.2mm | ASTM A53/EN 39 Standard

Takaitaccen Bayani:

Galvanization na tsoma mai zafi wani nau'i ne na galvanization. Wannan tsari ne na shafa ƙarfe da ƙarfe da zinc, wanda ke haɗa saman ƙarfen tushe lokacin da ake nutsar da ƙarfen a cikin baho na zinc mai narkewa a zafin jiki na kusan 450 °C (842 °F).


  • Alloy Ko A'a:Ba Alloy ba
  • Siffar Sashe:Zagaye
  • Daidaitacce:AiSi, ASTM, BS, DIN, GB, JIS, GB/T3094-2000, GB/T6728-2002, ASTM A500, JIS G3466, DIN EN10210, ko wasu
  • Fasaha:Sauran, An yi birgima da zafi, An yi birgima da sanyi, ERW, An yi walda mai yawan mita, An fitar da shi
  • Maganin Fuskar:Sifili, Na Kullum, Ƙarami, Babban Spangle
  • Haƙuri:±1%
  • Sabis na Sarrafawa:Walda, Hudawa, Yankewa, Lankwasawa, Decoiling
  • Lokacin Isarwa:Kwanaki 7-10
  • Sashen Biyan Kuɗi:30% TT a gaba, a rage farashi kafin jigilar kaya
    • Whatsapp

    Cikakken Bayani game da Samfurin

    Alamun Samfura

    Cikakken Bayani game da Samfurin

    Bututun galvanized mai zafiAna yin sa ne ta hanyar tsarin ƙarfe wanda ake tsoma ƙarfe a cikin zinc mai narkewa kuma idan zinc ya yi aiki da ƙarfe don samar da layin ƙarfe mai zinc-iron wanda ke manne da ƙarfe. Tsarin ya ƙunshi yin ɗanɗano don cire ƙazanta na baƙin ƙarfe da ƙarfe mai narkewa, tsaftacewa busasshe tare da ammonium chloride, zinc chloride, ko cakuda gishiri. Sannan ana tsoma bututun ƙarfe a cikin zinc mai narkewa inda wani ɗigon zinc ya kewaye shi, a wannan lokacin halayen jiki da sinadarai masu rikitarwa suna faruwa wanda ke haifar da layin ƙarfe mai ɗaurewa da juriya ga tsatsa. Wannan yana samar da layin zinc mai tsabta wanda ke haɗuwa ba tare da matsala ba tsakanin substrate da layin electrolytic wanda ke ba da cikakken rufewa mai kyau da kyakkyawan juriya ga tsatsa na dogon lokaci wanda hakan ya sa ya dace da aikace-aikacen masana'antu, gini da kayayyakin more rayuwa.

    镀锌圆管_12

    Babban Aikace-aikacen

    Siffofi

    1. Juriyar Tsatsa Mai Girma

    Gilashin da ake jikawa a cikin ruwan zafi yana samar da wani kauri mai kauri na zinc-iron wanda ke kare karfen daga tsatsa, koda a waje da kuma muhallin danshi.

    2. Babban ƙarfi & dorewa

    An yi su da ingantaccen ƙarfe, waɗannan bututun suna jure wa kaya masu nauyi da kuma amfani da su akai-akai a aikace-aikacen shimfidar katako.

    3. Rufin Tutiya Mai Sauƙi

    Tsarin galvanization yana tabbatar da kauri mai kauri, cikakken rufewa, da kuma kariya mai ɗorewa.

    4. Girman da za a iya gyarawa

    Akwai shi a diamita daban-daban, kauri na bango, da tsayi don biyan takamaiman buƙatun aikin.

    5. Ƙarancin Kulawa & Tsawon Rayuwar Sabis

    Rage haɗarin tsatsa yana rage farashin gyarawa kuma yana tsawaita tsawon rayuwar gine-ginen gini.

    Aikace-aikace

    1. Tsarin Scaffolding– Wurin gini, gyaran gini da kuma tsarin wucin gadi.

    2.Dandalin Masana'antu– Tallafin kayan aiki na masana'antu, rumbun ajiya, da masana'antu.

    3. Tsarin aiki da Shoring– Gina siminti don kwanciyar hankali a tsarin.

    4. Tsarin Wucin Gadi– Matakan taron, wuraren baje kolin kayan tarihi, da kuma tanti na wucin gadi.

    5. Gina Waje– Ba ya jure tsatsa don amfani a gadoji, bututun mai, da ayyukan ruwa.

    镀锌圆管_08

    Sigogi

    Sunan samfurin

    Bututun Galvanized
    Matsayi Q235B, SS400, ST37, SS41, A36 da sauransu
    Tsawon Daidaitaccen mita 6 da 12 ko kuma kamar yadda ake buƙata ga abokin ciniki
    Faɗi 600mm-1500mm, bisa ga buƙatun abokin ciniki
    Fasaha An tsoma galvanized mai zafibututu
    Shafi na Zinc 30-275g/m2
    Aikace-aikace Ana amfani da shi sosai a cikin gine-gine daban-daban, gadoji, motoci, bracker, injina da sauransu.

    Cikakkun bayanai

    镀锌圆管_02
    镀锌圆管_03
    镀锌圆管_02
    镀锌圆管_03
    镀锌圆管_04
    镀锌圆管_05
    镀锌圆管_06
    镀锌圆管_07
    镀锌圆管_10
    PPGI_14

    Tambayoyin da ake yawan yi akai-akai

    Q1: Menene kauri da diamita na bango da ake samu?

    A: Muna bayar da kewayon diamita daga 21.3mm zuwa 89mm da kauri na bango daga 2.0mm zuwa 4.0mm, wanda za'a iya daidaita shi bisa ga buƙatun aikin.

    T2: Wane irin ƙarfe ake amfani da shi don waɗannan bututun?

    A: Muna amfani da ƙarfe mai inganci don tabbatar da ƙarfi da dorewa, wanda ya dace da shimfidar katako da aikace-aikacen nauyi.

    Q3: Ta yaya ake amfani da rufin galvanized?

    A: Bututun an yi su ne da sinadarin galvanized mai zafi, wanda ke samar da wani kauri mai ƙarfi na ƙarfe da zinc wanda ke ba da kariya iri ɗaya da juriya ga tsatsa na dogon lokaci.

    Q4: Menene rayuwar sabis ta yau da kullun?

    A: Idan aka yi amfani da shi yadda ya kamata, bututun da aka yi da hot-dimming scaffolding na iya ɗaukar shekaru 15-20, ko da a waje da kuma muhallin danshi.

    Q5: Za ku iya samar da tsayi da ƙayyadaddun bayanai na musamman?

    A: Eh, muna bayar da tsayi, diamita, da kauri na musamman don biyan buƙatun aikinku na musamman.

  • Na baya:
  • Na gaba:
    • Rubuta saƙonka a nan ka aika mana da shi

    Samfurirukunoni