Kamfanin kera da kuma mai samar da kayayyaki na EN 10025-2 S235JR na ƙarfe mai tsari da kuma na'urar samar da kayayyaki ta H-Beam

EN 10025-2 S235JR Karfe Mai Tsarin H-Beam

EN 10025-2 S235JR H-Beam na Karfe Mai Tsarin Siffa

Takaitaccen Bayani:

A matsayin wakilin "An yi a China", KU KASANCE MASU HAKKIN KOWANNE TON KARFE DA MUKE FITARWA!

A matsayina na jagora a fannin samar da ƙarfe a duniya,Ƙungiyar Karfe ta Royalyana gabatar da inganci mai kyauEN 10025-2 S235JR H-beamsWannan H-beam mai zafi-birgima wani nau'in ƙarfe ne mai zafi-birgima mai siffar giciye mai siffar "H", wanda kuma aka sani da H-beam, H-section beam, H-shape beam, H profile beam. Saboda kyawun ƙarfinsa na walda da kwanciyar hankali na tsarin, yana ɗaya daga cikin fitattun bayanan martaba masu zafi-birgima da ake amfani da su a masana'antar gini, injiniyan farar hula, da injiniyan injiniya.

Sunan Alamar:Ƙungiyar Karfe ta Royal

Ma'aunin Kayan Aiki:Matsayin Turai, EN 10025

Maki:S235JR

Girma:W4x13, W8x40, W10x22, W24x5,5 W30x132, da sauransu.

Cikakkun Bayanan Marufi:Fitar da marufi, ɗaurewa da kuma tsarewa daga ruwa mai hana ruwa shiga

Ikon Samarwa:Tan 5000 a kowane wata

Sharuɗɗan Biyan Kuɗi:T/T, Western Union

Lokacin Isarwa:Kwanaki 10-25 na Aiki

Aika mana imel Whatsapp

Cikakken Bayani game da Samfurin

Alamun Samfura

Gabatarwar Samfuri

Siffa	Cikakkun Bayanan Fasaha
Sunan Samfuri	Musamman Mai Zafi Na Karfe H Beam/ Hasken Duniya (UB)
Daidaitacce	EN 10025-2:2004
Karfe Grade	S235JR (Lambar Kayan Aiki: 1.0038)
Maki Mai Daidai	ASTM A36, JIS SS400, GB/T Q235B
Girma	Jerin HEA, HEB, HEM (100mm - 1000mm)
Tsawon	6m, 9m, 12m ko kuma an keɓance shi bisa ga buƙatun aikin
Maganin Fuskar	Ba a taɓa shi ba, Mai Baƙi, Busasshen Harbi (Sa 2.5), An riga an dafa shi da kyau, ko kuma an tsoma shi da ruwan zafi a cikin galvanized
Haƙuri	Dangane da EN 10034

Bayanan Fasaha

EN 10025 S235JR HEA/HEB/HEMHasken Siffar HSinadarin Sinadarai

Sinadarin	C	Si	Mn	P	S	N	Al
Abun ciki (%)	≤0.17	≤0.35	≤1.40	≤0.035	≤0.035	≤0.012	≥0.020

EN 10025 S235JR HEA/HEB/HEMTsarin Karfe H BeamKadarar Inji

Ƙarfin Ba da Lamuni (ReH)	Ƙarfin Taurin Kai (Rm)	Tsawaita (A%)	Makamashin Tasiri (KV)
Matsakaici 235 MPa	360 - 510 MPa	Mafi ƙaranci. 26%	27J a 20°C (JR Grade)

Girman Haske ...

Girman Sashe (H × B) mm	Kauri a Yanar Gizo (t1) mm	Kauri na Flange (t2) mm	Nauyi (kg/m)	Aikace-aikacen da Aka saba
100 × 100	4.5 – 6.0	6 – 10	16 – 20	Tsarin ƙarfe mai sauƙi, ƙananan firam
150 × 150	5.0 – 7.0	7 – 11	30 – 36	Gine-ginen gidaje, sandunan tallafi
200 × 200	6.5 – 9.0	8 – 12	50 – 61	Gine-ginen masana'antu na matsakaici
250 × 250	7.0 – 10.0	9 – 14	72 – 90	Rumbun adana kayayyaki, manyan tsare-tsare
300 × 300	8.0 – 12.0	10 – 15	94 – 117	Tsarin gine-gine masu faɗi
400 × 400	13 – 21	16 – 28	155 – 211	Manyan masana'antu da kayayyakin more rayuwa

Danna maɓallin da ke kan dama

Sauke SabonKatako Mai Siffar Karfe Mai Siffar H HEA HEBBayani dalla-dalla da Girma.

Danna Nan

Muhimman Fa'idodi

Na musamman Weldability:Ƙananan sinadarin carbon da ke cikinS235JR H Beamyana sa ya zama mafi dacewa ga duk hanyoyin walda na yau da kullun ba tare da buƙatar dumamawa ba.

Ingantaccen Tsarin:Tsarin siffa ta H yana ba da ƙarfin ɗaukar kaya mai kyau da kuma babban rabo mai ƙarfi-da-nauyi idan aka kwatanta da daidaitattun igiyoyin I.

Tsarin sarrafawa iri-iri:Mai sauƙin yankewa, lanƙwasawa, da kuma injina. Muna ba da ayyukan sarrafawa na musamman waɗanda suka haɗa da hudawa, walda, da kuma shafa mai hana tsatsa.

Bin Dokoki da Bin Dokoki:An ba shi Takardar Shaidar Gwajin Injin (MTC) bisa ga EN 10204 3.1, don tabbatar da cewa kowace tan ta cika ƙa'idar da ake buƙata.

Teburin Kwatanta Girman H-Beam da Juriya na EN 10025 S235JR

Sigogi	Nisa Mai Haƙuri	Bayani
Tsawo (H)	±2.0 mm zuwa ±3.0 mm	Ya dogara da zurfin hasken rana
Faɗin Flange (B)	±2.0 mm	Yana sarrafa daidaiton haɗin kai
Kauri a Yanar Gizo	±0.5 mm zuwa ±1.0 mm	Yana shafar ƙarfin yankewa
Kauri na Flange	±0.5 mm zuwa ±1.5 mm	Yana shafar ƙarfin kaya
Daidaito	≤ L/1000	Matsakaicin karkacewa da aka yarda
Girman Flange na murabba'i	≤ 1.0% na faɗin flange	Tabbatar da daidaito mai kyau
Juyawar	≤ 2 mm a kowace mita	Yana iyakance nakasar tsarin

Abubuwan da aka keɓance na EN S500JR H-Beam

Keɓancewa Girma: Ana iya tsara H (100–1000mm), B (100–300mm), t_w (5–40mm) da t_f (6–40mm) a matsayin da ya dace; ana iya yankewa zuwa tsayi.

Sarrafa Keɓancewa: Hakowa, gyaran ƙarshe da walda da aka riga aka tsara su abin karɓa ne. Ana samun ayyukan yin beveling, grooving, walda, da injina don biyan buƙatun haɗi.

Keɓancewa na Gyaran Fuskar: An yi fenti da fenti/Epoxy, An yi masa fenti da yashi, an gama saman asali da sauran ƙarewa na musamman. Zaɓin ya dogara ne akan yanayin sabis da buƙatun aiki na kariyar tsatsa.

Keɓancewa da Alamar Marufi: Ana samun alama ta musamman (tare da ID na aikin ko ƙayyadaddun bayanai); ana iya keɓance marufi don jigilar kaya a kan gado ko kwantena.

Ƙarshen Fuskar

Fuskar Yau da Kullum

Fuskar Galvanized (kauri mai zafi ≥ 85μm, tsawon lokacin sabis har zuwa shekaru 15-20),

Baƙin saman mai

Babban Aikace-aikacen

Gine-ginen Tsarin Karfe:Rumbunan ajiyar kayayyaki na masana'antu, wuraren bita, da kuma manyan gine-ginen kasuwanci.

Ayyukan Kayayyakin more rayuwa:Gadaje, hasumiyoyin watsawa, da kuma gina tashoshin jiragen ruwa.

Masana'antar Inji:Tsarin tushe don kayan aiki masu nauyi da kuma chassis na abin hawa.

Injiniyan Ruwa:Tsarin tallafi ga dandamali na ƙasashen waje.

aikace-aikacen katako na astm a992 a572 h royal steel group (2)

aikace-aikacen katako na astm a992 a572 h royal steel group (4)

aikace-aikacen katako na astm a992 a572 h royal steel group (3)

aikace-aikacen katako na astm a992 a572 h royal steel group (1)

Ribar Kamfanin Royal Steel (Me Yasa Kamfanin Royal Ya Fi Kyau Ga Abokan Ciniki Na Amurka?)

Isar da Sabis na Duniya:Yana hidima ga ƙasashe sama da 200 tare da rassan gida a Amurka, Mexico, Guatemala, da kuma haɗin gwiwa mai mahimmanci a Costa Rica.

Tabbatar da Inganci:Tsarin bin diddigin BV/SGS na ɓangare na uku don tabbatar da "Babu kayan maye gurbin."

Isarwa Mai Sauri:Amfani da hanyoyin sadarwa na dabaru don tabbatar da cewa aikinku ya ci gaba da aiki yadda ya kamata.

Sabis na Tsayuwa Ɗaya:Daga ƙirar CAD da sarrafa ƙarfe zuwa jigilar kaya ta ƙasashen waje da tallafin fasaha na gida.

Sami Farashi Yanzu! Aika Tambaya Cikin Awa 12

Shiryawa da Isarwa

Marufi
Ana ɗaure fakitin da aka saba da su da madaurin ƙarfe na 12-16mm, wanda ke da tashar ɗagawa da ta dace da tan 2-3 a cikin tarin.
Kowace fakitin an naɗe ta da tawul mai hana ruwa shiga da kuma fakitin busarwa don hana tsatsa a lokacin da ake tafiya.
Ƙarin murfin mai hana tsatsa ga manyan sassa (jerin HEM ko tsayin sashe ≥800mm).
Lakabi guda biyu (Turanci/Sifaniyanci) tare da maki, girma, lambar HS, batch da lambar MTC.

Isarwa
Sashen jigilar kayayyaki mai dogaro tare da haɗin gwiwa na dogon lokaci tare da manyan dillalai: MSK, MSC, COSCO, da sauransu.
Akwai: Kwanaki 7 ~ 15 don kayan ajiya; Kwanaki 15 ~ 30 don odar samarwa.
A ƙarƙashin tsarin kula da inganci na ISO9001, duk hanyar da za a bi don tabbatar da cewa an isar da ku zuwa tashar jiragen ruwa.
Sharuɗɗan jigilar kaya suna da sassauƙa ga jadawalin aikin ku.

Tambayoyin da ake yawan yi akai-akai

T1: Shin S235JR da ASTM A36 abu ɗaya ne?
A: Eh, suna da kama da juna don amfani da kuma iya walda. S235JR (Turanci na Turai) da A36 (Ma'aunin Amurka) suna kama da juna ta hanyar da aka yi amfani da su wajen gina gine-gine gabaɗaya.

T2: Ta yaya za ku tabbatar da "Babu wani abu da zai maye gurbin"?
A: Za a bayar da Takardar Shaidar Gwajin Injin Asali (MTC) ga kowane jigilar kaya bisa ga ƙa'idar EN 10204 3.1. Muna goyon baya da kuma ƙarfafa binciken ɓangare na uku (SGS/BV) don tabbatar da halayen sinadarai da na inji kafin a ɗora kaya.

Q3: Waɗanne irin kammala saman akan hana lalatawa kuke da su?
A: An tsoma Galvanized mai zafi - Rayuwa mafi girma a cikin Muhalli na Teku/Danshi.
Bugawa da kuma yin amfani da harsashi: Sa 2.5 don amfani kai tsaye ga aikin gini.
An shafa mai a jiki: Na ɗan gajeren lokacin kariya.

Q4: Zan iya yin odar sarrafa kayan aiki na musamman (Yanke/Hakowa)?
A: Eh. Haka nan za mu iya yankewa daidai da tsayi da kuma aikin haƙa CNC daga fayilolin CAD ɗinku, wanda zai taimaka muku adana lokaci da kuɗin aiki a wurin aiki.

Q5: Menene lokacin jagora da yawa da kuka saba amfani da su don lodawa?
A: Girman da ke cikin hannun jari: Kwanaki 7-15 Adadin aikin: Kwanaki 25-40.
Marufi: Kimanin tan 25-27/kwantenar ƙafa 20, jigilar kaya ta teku, haɗin ƙwararre don marufi mai ƙarfi.

T6: Shin kuna da tallafi na gida a Amurka?
A: Eh. Muna da ofisoshi a Amurka, Mexico da Guatemala don yi muku hidima a yankinku, tare da hanzarta mayar da martani da kuma tallafin fasaha ga abokan cinikinmu a Yammacin Duniya.