Mai Samar da Bututun Karfe na ASTM A500 Grade B/C | Mai Samar da Kaya da Mai Samar da Kaya na Royal Steel Group

Mai Kaya Tushen Bututun Karfe na ASTM A500 Grade B/C a China | Bututun Karfe na SSAW / LSAW don Aikace-aikacen Tushewa

Mai Kaya Tushen Bututun Karfe na ASTM A500 Grade B/C a China | Bututun Karfe na SSAW / LSAW don Aikace-aikacen Tushe Hoton da aka Nuna

Takaitaccen Bayani:

Kamfanin Royal Steel Group yana bayar da tayinTubalan bututun ƙarfe na ASTM A500 Grade B/Cdon amfani a cikin tarin tushe, gina ruwa, tallafin gada da sauran ayyukan ababen more rayuwa a duk duniya. Tushen bututun ƙarfe namu suna samuwa a cikin nau'i biyu, LSAW da SSAW, kuma suna ba da ƙarfi na musamman, inganci mai kyau, tudun bututun ƙarfe da aka ƙera musamman da kuma isar da sauri a duk duniya. Ana iya bayar da duba MTC da na ɓangare na uku idan an buƙata.

Daidaitacce:ASTM A500

Maki:Darasi na B, Darasi na C

Nau'i:SSAW / LSAW (EFW)

Diamita na waje:273mm – 3200mm

Kauri a Bango:6mm - 40mm

Tsawon:6m–18m, Tsawon Musamman

Aikace-aikace:Gina harsashi mai zurfi, tarin gada, tashar jiragen ruwa da ginin ruwa, iskar teku

Aika mana imel Whatsapp

Cikakken Bayani game da Samfurin

Alamun Samfura

Gabatarwar Samfuri

Sigar Samfurin	Bayanan Fasaha (ASTM A500 Grade B / Grade C)
Tsarin Masana'antu	• ERW (An yi walda da juriyar wutar lantarki) • LSAW (Welded na Tsawon Ruwa Mai Zurfi) • SSAW (An yi walda da aka yi da karkace a cikin baka)
Diamita na Waje (OD)	1/4" zuwa 88" (13.7 mm – 2235 mm) / Ana iya keɓance shi don sawun aikin
Kauri a Bango (WT)	1.65 mm zuwa 25.4 mm (Jadawalin 10 zuwa Jadawalin XXS)
Zaɓuɓɓukan Tsawon	• Tsawon da aka ƙayyade: mita 6.0, mita 12.0, ƙafa 20, ƙafa 40 • Tsawon Bazuwar Ɗaya (SRL) da Tsawon Bazuwar Biyu (DRL) • Tsawon da aka ƙera har zuwa mita 18+
Kayayyakin Inji	[Zagaye-zagaye - Aji na B]: • Ƙarfin Yawa: Mafi ƙarancin 42,000 psi (290 MPa) • Ƙarfin Tashin Hankali: Mafi ƙarancin 58,000 psi (400 MPa) • Tsawaita: Mafi ƙaranci. 23%[ Zagaye-zagaye - Aji C]: • Ƙarfin Yawa: Mafi ƙarancin 46,000 psi (317 MPa) • Ƙarfin Tashin Hankali: Mafi ƙarancin 62,000 psi (427 MPa) )• Tsawaita: Mafi ƙaranci. 21%
Sinadarin Sinadarai	[Mataki na B]: C ≤ 0.26%, Mn ≤ 1.35%, P ≤ 0.035%, S ≤ 0.035% [Mataki na C]: C ≤ 0.23%, Mn ≤ 1.35%, P ≤ 0.035%, S ≤ 0.035% (Zaɓi: Copper Cu ≥ 0.20% don ingantaccen juriya ga tsatsa a yanayi)
Juriyar Girma	• Diamita na Waje (OD): ±0.75% (don girma ≥ inci 2) • Kauri a Bango: ±10% na kauri mara suna • Daidaito: ≤ 1/8" × (Jimillar tsawon ƙafa / 5)
Kammalawar Fuskar da Hana Tsatsa	• Fuskar da aka shafa mai/baƙi • Yin fenti mai hana tsatsa/ fenti baƙi • An yi amfani da galvanized mai zafi (HDG) – Nauyin zinc har zuwa 550g/m² • Rufin da aka yi wa ado da kyau: 3PE, FBE (Fusion Bonded Epoxy)
Ƙirƙirar Ƙarshe	Ƙarshen da aka yanke, ƙarshen da aka yanke, faranti na ƙarshe da aka haɗa da walda, takalman tuƙi mai siffar mazugi, zoben baya, ramukan da aka haƙa, da kuma kayan ɗagawa
Takardun Inganci	Takardar Shaidar Gwajin Injin (MTC) wacce ta dace da EN 10204 3.1, Rahoton NDT (Rahotan Ultrasonic/X-ray), da Tabbatar da Wasu (SGS, BV, TUV, Intertek)

tarin bututun ƙarfe na ƙungiyar ƙarfe ta sarauta (6) (1)

tarin bututun ƙarfe na ƙungiyar ƙarfe ta sarauta (1) (1)

tarin bututun ƙarfe na ƙungiyar ƙarfe ta sarauta (2) (1)

Bayanan Fasaha

Tubalan bututun ƙarfe na ASTM A500Sinadarin Sinadarai

Sinadarin	Aji A (%)	Aji na B (%)	Darasi na C (%)
Carbon (C), matsakaicin	0.26	0.26	0.23
Manganese (Mn), matsakaicin	1.35	1.35	1.35
Phosphorus (P), mafi girma	0.035	0.035	0.035
Sulfur (S), matsakaicin	0.035	0.035	0.035
Tagulla (Cu), min ①	0.2	0.2	0.2

Tubalan bututun ƙarfe na ASTM A500Kadarar Inji

Matsayi	Ƙarfin Tauri (minti)	Ƙarfin Yawa (minti)	Tsawaita a cikin 2" (50mm), min
A	45,000 psi (310 MPa)	39,000 psi (269 MPa)	kashi 25%
B	58,000 psi (400 MPa)	46,000 psi (315 MPa)	Kashi 23%
C	62,000 psi (425 MPa)	50,000 psi (345 MPa)	kashi 21%

Tubalan bututun ƙarfe na ASTM A500Girman girma

Bayanin Fitarwa na gama gari (Matsakaicin Mataki na 3 Mafi Shahara)
NPS	OD (mm)	Kauri a Bango	Nauyi (kg/m)	Jadawalin Kullum	Babban Aikace-aikacen
16"	406.4	0.375" (9.52mm)	92.5	STD	Tashoshin tashar jiragen ruwa, ginin gabaɗaya
16"	406.4	0.500" (12.70mm)	121.8	40	Tushen iska a bakin teku, mashigar gada
18"	457	0.500" (12.70mm)	137.4	40	Gine-ginen masana'antu masu nauyi, tushe mai zurfi
"24"	609.6	0.500" (12.70mm)	183.2	40	Manyan tsibiran diamita, gine-ginen ruwa
"24"	609.6	0.750" (19.05mm)	271.8	XS	Aikace-aikacen kaya masu nauyi sosai, tuƙin dutse
30"	762	0.625" (15.88mm)	287.5	40	Tashoshin jiragen ruwa na teku, tushen tashar LNG
36"	914.4	0.750" (19.05mm)	392.3	40	Manyan ayyuka, gadoji na ketare teku

Tsarin Kerawa da Ƙarfin Girma
Tsarin aiki	Matsakaicin OD (mm)	Matsakaicin WT (mm)	Nisan Tsawon (m)	Ingantaccen Farashi	Mafi Kyau Ga
SSAW (Sarfi)	3200	30	6-18	Mafi girma	Babban diamita, kauri na bango matsakaici (16"-48")
LSAW (JCOE)	1422	50	6-15	Babban	Bango mai kauri sosai (≥1.0"), buƙatun ƙarfi mai yawa
ERW	660	25	6-12	Matsakaici	Ƙarami zuwa matsakaici diamita, kauri bango na yau da kullun
Ba shi da sumul	1016	100	6-12	Mafi ƙasƙanci	Aikace-aikace masu mahimmanci, muhallin lalata

Danna maɓallin da ke kan dama

Tuntube mu don samun Sabbin LabaraiTubalan Bututun KarfeBayani dalla-dalla da Girma.

Danna Nan

Ƙarshen Fuskar

Juriyar tsatsa yana ɗaya daga cikin muhimman abubuwan da ke haifar da ayyukan ruwa da na bakin teku.

Kamfanin Royal Steel Group yana ba da mafita iri-iri na hana lalata:

Baƙin Karfe Surface

Ya dace da gina ƙasa da kuma sarrafa ta na biyu.
Rufin Haɗaɗɗen Epoxy (FBE)

Yana bayar da kyakkyawan juriya ga sinadarai da kuma kariya ta dogon lokaci.

Tsarin Shafi na 3PE

Ya ƙunshi:

Firam ɗin Epoxy
Layer mai mannewa
Layer na waje na polyethylene

Ana amfani da wannan tsarin sosai a ayyukan ruwa, gine-ginen teku, da kuma tushen bututun mai.

Fuskar 3PE

FBE Surface

Baƙin saman mai

Babban Aikace-aikacen

1. Tushen Bangon Gine-gine:Tara harsashin ginin gine-gine masu hawa da yawa, masana'antu, rumbunan ajiya, gine-ginen kasuwanci da na zama (wanda ya dace da kowane irin gini).

2. Tushen Gada:Tushen gini mai ƙarfi don gadoji na manyan hanyoyi, gadoji na jirgin ƙasa da hanyoyin shiga birane; ya dace da gadoji masu sauƙi, marasa nauyi, masu tsayayye ko masu iyo waɗanda ke ratsa koguna, tafkuna da tekuna.

3. Gina Tashar Jiragen Ruwa:Tushen da aka dogara da shi don tasoshin jiragen ruwa, wuraren jigilar kaya da dandamalin tashar jiragen ruwa, da kuma kayan aiki masu nauyi na tashar jiragen ruwa da wuraren sarrafa kaya.

4. Ayyukan Injiniya da Wutar Lantarki ta Iska ta Ruwa da ta Ƙasashen Waje:Kayayyakin gini na masana'antar ruwa da injinan iska na teku, waɗanda ke da juriya ga raƙuman ruwa, raƙuman ruwa da kuma tsatsa a cikin ruwa.

5. Duk Injiniyan Farar Hula Mai Girma:Tubalan da ke ɗauke da kaya masu yawa don manyan ayyukan injiniyan farar hula kamar madatsun ruwa, tashoshin ƙarƙashin ƙasa, ramuka, da kuma injunan masana'antu da kayan gini.

Ribar Kamfanin Royal Steel (Me Yasa Kamfanin Royal Ya Fi Kyau Ga Abokan Ciniki Na Amurka?)

1) Ofishin Reshe - Tallafin da ake bayarwa ga masu magana da Sifaniyanci, taimakon share kwastam, da sauransu.

2) Sama da tan 5,000 na kaya a hannun jari, tare da nau'ikan girma dabam-dabam

bututun ƙarfe na saw - ƙungiyar sarauta (1)

bututun ƙarfe na ssaw - ƙungiyar sarauta (3)

3) Ƙungiyoyi masu iko kamar CCIC, SGS, BV, da TUV sun duba su, tare da marufi na yau da kullun masu dacewa da ruwa.

Shiryawa da Isarwa

1. Marufi:

Ana amfani da tubalan katako ko dunnage tsakanin layukan jakunkunan marufi ko kwantena don hana lalacewa yayin jigilar kaya.

Gyaran saman (zaɓi ne): Fenti baƙi, mai hana tsatsa, ko kuma roƙon filastik.

Za a iya rufe tarin galvanized da aka tsoma a cikin ruwan zafi da fim ɗin kariya na ɗan lokaci don hana karce saman.

Ana samun marufi na musamman.

2. Sufuri:

Tsawon lanƙwasa na kaya: mita 6, mita 12. Haka kuma ana samun tsayin da ba na yau da kullun ba idan aka buƙaci aikin.

Ya dace da sufuri na teku, jirgin ƙasa, ko kan hanya.

Lokacin isarwa yawanci yana tsakanin kwanaki 15-30 bayan karɓar kuɗi, ya danganta da nau'in samfurin da takamaiman bayanai.

Ya dace da fitarwa zuwa ƙasashen duniya, tare da cikakkun takardu (takardar shaidar daidaito, jerin kayan daki, takardar biyan kuɗi).

3. Kula da Kariya:

A ɗaure bututun da kyau ta amfani da crane ko forklift wanda aka sanye da majajjawa ko majajjawa don hana lalacewa.

A ajiye bututun a wuri mai busasshe, mai iska, kuma mai sanyi kafin a saka su domin hana tsatsa.

Dole ne jigilar kaya masu girma/kiba su bi ƙa'idodin sufuri na gida.

Tambayoyin da ake yawan yi akai-akai

1. Me yasa ASTM A500 ya dace da manyan bututun tushe?

ASTM A500 bututun ƙarfe ne mai tsari mai sanyi wanda ke da juriya ga matsi mai ƙarfi, rabo mai ƙarfi-da-nauyi, da kuma ingantaccen aikin gini, yana tabbatar da shigar da ainihin tukwanen tushe masu zurfi don manyan kayayyakin more rayuwa.

2. Menene bambanci tsakanin ASTM A500 Grade B da ASTM A500 Grade BMatsayi C?

Aji na B: Mafi ƙarancin ƙarfin amfani 42,000 psi (290 MPa), wanda ya dace da tarin abubuwa a ƙarƙashin nauyin da aka saba.

Daraja ta C: Ƙarfin samar da mafi ƙarancin amfani, har zuwa 46,000 psi (317 MPa), ƙarancin yawan sinadarin carbon, ya dace da ayyukan da ke ɗauke da manyan kaya, kuma yana da kyakkyawan ƙarfin walda.

3. Menene bambanci tsakanin ASTM A500 da ASTM A252 don tukwanen tushe?

A252 shine daidaitaccen tsarin bututun bututu; A500 yana da juriya mai ƙarfi da kuma saman da ya fi santsi, wanda hakan ya sa ya dace da tushe mai buɗewa, na ruwa, da kuma daidaitacce.

4. Za a iya haɗa tarin ƙarfe na A500 a filin?

Eh. Sarrafa sinadarin carbon da manganese yana rage yawan sinadarin carbon, yana hana tsagewar sanyi, kuma yana sauƙaƙa haɗa shi a wurin.

5. Waɗanne nau'ikan rufin hana lalata ne suka dace da muhallin ruwa/wanda aka fallasa?

Manyan zaɓuɓɓuka guda uku: Man Balck, murfin 3PE, da kuma murfin FBE, wanda ya dace da yanayin bakin teku/ruwa mai lalata.

6. Za ku iya tsara yadda ake sarrafa bayanai bisa ga zane-zanen aikin?

Eh, za mu iya samar da: diamita/kauri na waje na musamman, tsawon yankewa mai ɗorewa, bevels, faranti na ƙarshe, sansanonin tuƙi, da kuma abubuwan ɗagawa.

7. Waɗanne takaddun shaida na inganci ake bayarwa lokacin jigilar kaya?

Muna bayar da takardar shaidar gwajin kayan EN10204 3.1 (MTC); muna karɓar duba kafin jigilar kaya daga ƙungiyoyi na ɓangare na uku kamar SGS/BV/TUV/DNV.