Tuntube Mu don samun sabbin bayanai da girma na na'urar silicon steel mai tushen hatsi ta IEC 60404-8-4 (GO).
IEC 60404-8-4 Na'urar Silikon Karfe Mai Daidaita Hatsi (GO) - Na'urar Canzawa Mai Inganci da Karfe Mai Inganci
| Abu | Bayani |
| Sunan Samfuri | Na'urar ƙarfe ta silicon mai tushen hatsi ta IEC 60404-8-4 |
| Nau'in Karfe | Karfe Mai Lantarki Mai Tsarin Hatsi (GOES) |
| Tsarin Masana'antu | An yi birgima a cikin sanyi, an rufe shi sosai |
| Daidaitacce | Hukumar Kula da Makamashi ta Duniya (IEC) |
| Aikace-aikace na yau da kullun | Na'urorin Transfoma, Injina, Janareta, Injin Inductor |
| Sinadarin | Abubuwan da ke ciki (wt%) | Bayani |
| Si (Silikon) | 2.8 – 3.5 | Yana inganta halayen maganadisu kuma yana rage asarar core |
| C (Kabon) | ≤ 0.005 | Ƙananan carbon don mafi kyawun yanayin maganadisu |
| Mn (Manganese) | ≤ 0.30 | Yana inganta ƙarfin injina |
| S (Silfur) | ≤ 0.005 | Ƙarancin sulfur don rage karyewar |
| P (Fosphorus) | ≤ 0.03 | Yana kula da daidaiton abu |
| Fe (Ƙarfe) | Daidaito | Tushen ƙarfe na silicon steel coil |
| Wasu | ≤ 0.02 | Ya haɗa da abubuwan da aka gano kamar Al, Cu, da Cr |
| Nau'i | Kadara | Darajar da Aka Tsara / Takamaiman | Bayanan kula |
| Nau'in Karfe | Sinadarin Sinadarai | ~3.0–3.2% Si, ƙasa da C | An tsara shi don ƙarancin asarar core da kuma ƙarfin maganadisu mai yawa |
| Girman Jiki | Kauri | 0.18–0.35 mm (ana iya gyara shi) | Ana amfani da shi sosai don laminations na tsakiya na transformer |
| Faɗi | Ana iya keɓancewa | Raba zuwa ga takamaiman buƙatun abokin ciniki | |
| Yawan yawa | ~7,650 kg/m³ | Yawanci don ƙarfe silicon 3% | |
| Faɗakar Lamination / Tarawa | ≥0.96 | Yana nuna ƙanƙantar laminations masu tarawa | |
| Rufin Fuskar | C-5 ko wani abu makamancin haka na rufewa | Yana rage asarar eddy current na interlaminar | |
| Abubuwan Magnetic Properties | Asarar Zuciya (P) | 0.8–1.2 W/kg (50 Hz, 1.7 T) | An gwada shi bisa ga ASTM A343; ya bambanta dangane da matsayi |
| Magnetic Induction (B8 / J800) | ≥1.80–1.88 T | Maki masu inganci na iya samun sakamako mafi girma | |
| Dangantaka Mai Dorewa (μᵣ) | 1,000–1,800+ | Hanyar birgima mai tsayi; mafi girma don maki Hi‑B | |
| Tsufa/Daidaitaccen Magnetic | A cikin iyakokin da aka saba | Tabbatar da aiki mai dorewa na dogon lokaci | |
| Kayayyakin Inji | Mai jurewa / Mai iya aiki | Ya cika ƙa'idodi na yau da kullun | Ya dace da naushi, lanƙwasawa, da kuma tara |
| Ka'idojin Gwaji | ASTM A343 / ASTM A804, da sauransu. | An gwada manyan kaddarorin bisa ga hanyoyin da aka saba |
Danna maɓallin da ke kan dama
| Nau'in Aikace-aikace | Aikace-aikace na yau da kullun | Bayanan kula |
| Masu Canza Wutar Lantarki | Babban laminations na rarrabawa da wutar lantarki | An ƙera shi don ƙarancin asarar ƙarfe da kuma yawan amfani da shi don rage asarar makamashi. |
| Masu Canza Kayan Aiki | Masu canza wutar lantarki na yanzu (CT), masu canza wutar lantarki (VT) | Babban daidaiton maganadisu yana ba da damar aunawa da aunawa daidai. |
| Manyan Motocin Wutar Lantarki | Laminations na rotor da stator na injinan AC | Ingantaccen aikin karfin juyi yana rage asarar maganadisu kuma yana inganta inganci. |
| Janaretoci | Stator da rotor cores na janareta | Tabbatar da yawan kwararar maganadisu a cikin hanyar birgima yana haifar da ingantaccen aiki. |
| Masu ƙara maganadisu da Inductor | Na'urorin lantarki ko na'urorin maganadisu masu yawan mita | Ta hanyar amfani da ƙarancin asara da kuma yawan ƙarfin da ke shiga, ana samun ingantaccen ikon sarrafa maganadisu koda a gaban filayen maganadisu masu katsewa. |
| Kayan Aikin Makamashi Mai Sabuntawa | Injinan iska, janareto na wutar lantarki | Inganta ingancin canza makamashi a tsarin samar da wutar lantarki mai dorewa. |
| Na'urorin Wutar Lantarki na Musamman | Chokes, reactors, da na'urori masu auna maganadisu | Samun ingantaccen aikin maganadisu a cikin ƙaramin tsari mai ƙanƙanta. |
1) Ofishin Reshe - Tallafin da ake bayarwa ga masu magana da Sifaniyanci, taimakon share kwastam, da sauransu.
2) Sama da tan 5,000 na kaya a hannun jari, tare da nau'ikan girma dabam-dabam
3) Ƙungiyoyi masu iko kamar CCIC, SGS, BV, da TUV sun duba su, tare da marufi na yau da kullun masu dacewa da ruwa.
Halayen Marufi
Kariyar Naɗi: An yi tsakiyar kayan naɗin da ƙarfe ko bututun takarda, tare da ƙara masu kariya na kusurwa ko ƙarfen kusurwa a gefuna; an rufe saman da takarda mai hana danshi ko fim ɗin PE, kuma ana iya amfani da man hana tsatsa idan an buƙata.
Hanyar Tsaro: Ana amfani da madaurin ƙarfe mai ƙarfi don ɗaurewa; ana iya amfani da fale-falen katako ko tire idan ya cancanta.
Haɗawa (Zaɓi): Ana iya haɗa siririn biredi zuwa biredi da yawa, a raba su da takardar rabawa don hana karcewa, sannan a rufe su da fim ɗin filastik don kariya.
Hanyoyin Sufuri
Kaya a Teku: Yi amfani da kwantena masu tsawon ƙafa 20/ƙafa 40, an ɗaure su da katako mai kyau.
Sufurin Jirgin Ƙasa: Motar jigilar kaya ko ta jirgin ƙasa mai faɗi, an ɗaure ta da sarƙoƙi ko maƙallan ƙarfe.
Sarrafawa da Ajiya
Yi amfani da ƙugiya mai murfi, na'urorin ɗagawa, ko firam ɗin C don hana jawowa.
Ya kamata a ajiye kayan birgima a tsaye domin hana nakasa da tsatsa.
A adana a wuri busasshe, mai iska mai kyau, kuma kada a sanya su a sama da tsayi.
Haɗin gwiwa mai ƙarfi tare da kamfanonin jigilar kaya kamar MSK, MSC, COSCO, sarkar sabis na jigilar kaya, da sarkar sabis na jigilar kaya, mu ne abin da kuke gamsuwa da shi.
Muna bin ƙa'idodin tsarin kula da inganci na ISO9001 a duk matakai, kuma muna da cikakken iko tun daga siyan kayan marufi har zuwa jadawalin jigilar ababen hawa.
1. Menene shi kuma me yasa ake amfani da shi?
Karfe mai siffar silikon da aka yi da hatsi ƙarfe ne mai ƙarancin carbon, mai yawan silicon, wanda aka daidaita shi da alkiblar birgima. Wannan yana tabbatar da yawan ƙarfin maganadisu da ƙarancin asarar ƙwaya, wanda hakan ya sa ya dace da na'urorin lantarki masu amfani da wutar lantarki masu amfani da makamashi.
2. Aikace-aikace na yau da kullun:
Ana amfani da shi a cikin na'urorin canza wutar lantarki da kayan aiki, manyan injina, janareto, injinan samar da wutar lantarki, da kayan aikin makamashi mai sabuntawa inda ake buƙatar ingantaccen aiki na maganadisu.
3. Muhimman kaddarorin:
Kauri: 0.18–0.35 mm (ana iya gyara shi)
Asarar asali: ~0.8–1.2 W/kg @ 50 Hz, 1.7 T
Shigar da maganadisu (B8): ≥1.80–1.88 T
Ƙarfin da ke tsakanin mutane: 1,000–1,800+
Lamination factor: ≥0.96
4. Bambance-bambance da ƙarfe na silicon da ba a haɗa shi da tsari ba:
Ana amfani da ƙarfe mai tushen hatsi wajen sarrafa ƙarfe, wanda aka inganta shi don birgima (mafi kyau ga cores na transformer), yayin da ƙarfe mara tushen ƙarfe yana da isotropic, wanda ya dace da injinan juyawa kamar injina.
5. Nasihu kan yadda ake sarrafa shi da kuma adana shi:
A guji lanƙwasawa ko tara abubuwa da ke lalata yanayin hatsi.
A adana a busasshiyar muhalli, wadda ba ta lalata muhalli.
Rufin rufi (misali, C-5) yana rage asarar wutar lantarki ta eddy kuma yana kare laminations.
Cikakkun Bayanan Hulɗa
Adireshi
Yankin masana'antar ci gaban Kangsheng,
Wuqing gundumar Tianjin, kasar Sin.
Awanni
Litinin-Lahadi: Sabis na awanni 24
