shafi_banner

Tallace-tallace Masu Zafi Mafi Inganci Dx52d Z140 Takardar Karfe Mai Galvanized Don Gina Takardar Rufin Ƙarfe

Tallace-tallace Masu Zafi Mafi Inganci Dx52d Z140 Takardar Karfe Mai Galvanized Don Gina Takardar Rufin Ƙarfe Hoton da Aka Fito
  • Tallace-tallace Masu Zafi Mafi Inganci Dx52d Z140 Takardar Karfe Mai Galvanized Don Gina Takardar Rufin Ƙarfe
  • Tallace-tallace Masu Zafi Mafi Inganci Dx52d Z140 Takardar Karfe Mai Galvanized Don Gina Takardar Rufin Ƙarfe
  • Tallace-tallace Masu Zafi Mafi Inganci Dx52d Z140 Takardar Karfe Mai Galvanized Don Gina Takardar Rufin Ƙarfe
  • Tallace-tallace Masu Zafi Mafi Inganci Dx52d Z140 Takardar Karfe Mai Galvanized Don Gina Takardar Rufin Ƙarfe

Takaitaccen Bayani:

Takardar galvanizedwani nau'in kayan ƙarfe ne da aka shafa da zinc a saman farantin ƙarfe, galibi ana amfani da shi don hana tsatsa da ƙara ƙarfinsa. Takardar galvanized yawanci tsari ne na galvanizing mai zafi, wato, ana nutsar da farantin ƙarfe a cikin ruwan zinc mai narkewa don samar da wani Layer na zinc iri ɗaya a samansa. Wannan maganin zai iya hana ƙarfen lalacewa ta hanyar iska, ruwa da sinadarai, da kuma tsawaita rayuwarsa.

Ana amfani da takardar galvanized sosai a gine-gine, kayan daki, kera motoci, kayan aikin wutar lantarki da sauran fannoni. A masana'antar gine-gine, ana amfani da takardar galvanized don yin abubuwa kamar rufi, bango, bututu da ƙofofi da tagogi don inganta juriyarsu ga tsatsa da kyawunsu. A masana'antar kera motoci, ana amfani da takardar galvanized don yin harsashin jiki da abubuwan da aka gyara don ƙara juriyarsu ga yanayi da dorewarsu.

Gabaɗaya, takardar galvanized tana da kyakkyawan juriya ga tsatsa da kuma kaddarorin injiniya, muhimmin abu ne na ƙarfe, don kare ƙarfe daga tsatsa da kuma tsawaita rayuwarsa yana taka muhimmiyar rawa.


  • Nau'i:Takardar Karfe, Farantin Karfe
  • Aikace-aikace:Farantin Jirgin Ruwa, Farantin Boiler, yin samfuran ƙarfe masu sanyi, yin ƙananan kayan aiki, Farantin Flange
  • Daidaitacce:AiSi
  • Tsawon:30mm-2000mm, An keɓance shi
  • Faɗi:0.3mm-3000mm, An keɓance shi
  • Dubawa:SGS, TUV, BV, Duba Masana'antu
  • Takaddun shaida:ISO9001
  • Sabis na Sarrafawa:Walda, Hudawa, Yankewa, Lankwasawa, Decoiling
  • Lokacin isarwa::Kwanaki 3-15 (gwargwadon ainihin adadin)
  • Sharuɗɗan Biyan Kuɗi:T/T,Paypal, Western Union
  • Bayanin Tashar Jiragen Ruwa:Tashar jiragen ruwa ta Tianjin, Tashar jiragen ruwa ta Shanghai, Tashar jiragen ruwa ta Qingdao, da sauransu.
    • Whatsapp

    Cikakken Bayani game da Samfurin

    Alamun Samfura

    Cikakken Bayani game da Samfurin

    Farantin galvanized (3)

    Takardar galvanized wani nau'in kayan ƙarfe ne da aka shafa da zinc a saman farantin ƙarfe, wanda galibi ana amfani da shi don hana tsatsa da ƙara ƙarfinsa. Takardar galvanized yawanci ana yin ta ne da ruwan zafi, wato, ana nutsar da farantin ƙarfe a cikin ruwan zinc mai narkewa don samar da wani nau'in zinc a samansa. Wannan maganin zai iya hana ƙarfen lalacewa ta hanyar iska, ruwa da sinadarai, da kuma tsawaita rayuwarsa.

    Fa'idodin takardar galvanized sun haɗa da kyakkyawan juriyar tsatsa, ƙarfi da tauri mai yawa, kyakkyawan aikin sarrafawa da kuma aikin ado. Ana amfani da shi sosai a gine-gine, kayan daki, masana'antar motoci, kayan aikin wutar lantarki da sauran fannoni. A masana'antar gini, ana amfani da takardar galvanized don yin abubuwa kamar rufi, bango, bututu da ƙofofi da tagogi don inganta juriyar tsatsa da kyawun su. A masana'antar kera motoci, ana amfani da takardar galvanized don yin harsashin jiki da abubuwan da aka haɗa don ƙara juriyar yanayi da dorewa.

    Gabaɗaya, takardar galvanized tana da kyakkyawan juriya ga tsatsa da kuma kaddarorin injiniya, muhimmin abu ne na ƙarfe, don kare ƙarfe daga tsatsa da kuma tsawaita rayuwarsa yana taka muhimmiyar rawa.

    Babban Aikace-aikacen

    Siffofi

    1. Juriyar tsatsa, iya fenti, iya tsari da kuma iya walda tabo.

    2. Yana da amfani iri-iri, galibi ana amfani da shi ga sassan ƙananan kayan aikin gida waɗanda ke buƙatar kyakkyawan tsari, amma ya fi tsada fiye da SECC, don haka masana'antun da yawa suna canzawa zuwa SECC don rage farashi.

    3. An raba shi da zinc: girman spangle da kauri na layin zinc na iya nuna ingancin galvanizing, ƙarami da kauri sun fi kyau. Masu kera kuma za su iya ƙara maganin hana yatsa. Bugu da ƙari, ana iya bambanta shi ta hanyar shafa shi, kamar Z12, wanda ke nufin cewa jimlar adadin shafa a ɓangarorin biyu shine 120g/mm.

    Aikace-aikace

    kuma kayayyakin ƙarfe masu tsiri ana amfani da su ne musamman a gine-gine, masana'antu masu sauƙi, motoci, noma, kiwon dabbobi, kamun kifi da masana'antu na kasuwanci. Daga cikinsu, masana'antar gini galibi ana amfani da ita ne don ƙera allunan rufin masana'antu da na gine-ginen farar hula, grid na rufin gida, da sauransu; masana'antar hasken wutar lantarki tana amfani da ita wajen ƙera harsashin kayan gida, bututun hayaki, kayan kicin, da sauransu, kuma masana'antar motoci galibi ana amfani da ita ne don ƙera sassan motoci masu jure tsatsa, da sauransu; Noma, kiwon dabbobi da kamun kifi galibi ana amfani da su ne don adana hatsi da jigilar su, nama daskararre da kayayyakin ruwa, da sauransu; ana amfani da kasuwanci ne musamman don ajiya da jigilar kayayyaki, kayan marufi, da sauransu.

    镀锌板_12
    aikace-aikace
    aikace-aikace1
    aikace-aikace2

    Sigogi

    Tsarin Fasaha
    EN10147, EN10142, DIN 17162, JIS G3302, ASTM A653

    Karfe Grade
    Dx51D, Dx52D, Dx53D, DX54D, S220GD, S250GD, S280GD, S350GD, S350GD, S550GD; SGCC, SGHC, SGCH, SGH340, SGH400, SGH440,
    SGH490,SGH540, SGCD1, SGCD2, SGCD3, SGC340, SGC340, SGC490, SGC570; SQ CR22 (230), SQ CR22 (255), SQ CR40 (275), SQ CR50 (340),
    SQ CR80(550), CQ, FS, DDS, EDDS, SQ CR33 (230), SQ CR37 (255), SQCR40 (275), SQ CR50 (340), SQ CR80 (550); ko na Abokin Ciniki
    Bukatar
    Kauri
    buƙatar abokin ciniki
    Faɗi
    bisa ga buƙatar abokin ciniki
    Nau'in Shafi
    Karfe Mai Zafi (HDGI)
    Shafi na Zinc
    30-275g/m2
    Maganin Fuskar
    Passivation(C), Man shafawa(O), Hatimin lacquer(L), Phosphating(P), Ba a yi wa magani ba(U)
    Tsarin Fuskar
    Rufin spangle na yau da kullun (NS), murfin spangle da aka rage girmansa (MS), ba shi da spangle (FS)
    Inganci
    An amince da SGS, ISO
    ID
    508mm/610mm
    Nauyin Nauyin Nauyi
    Tan metric 3-20 a kowace na'ura

    Kunshin
    Takardar da ke hana ruwa ta ƙunshi marufi na ciki, an yi mata fenti da ƙarfe mai rufi ko kuma an yi mata fenti da ƙarfe mai rufi, an yi mata fenti da ƙarfe mai kauri, sannan an naɗe ta da ƙarfe mai kauri.
    bel ɗin ƙarfe bakwai. ko kuma bisa ga buƙatun abokin ciniki
    Kasuwar fitarwa
    Turai, Afirka, Asiya ta Tsakiya, Kudu maso Gabashin Asiya, Gabas ta Tsakiya, Kudancin Amurka, Arewacin Amurka, da sauransu

    Teburin Ma'aunin Farantin Karfe

    Teburin Kwatanta Kauri Mai Ma'auni
    Ma'auni Mai laushi Aluminum An yi galvanized Bakin karfe
    Ma'auni na 3 6.08mm 5.83mm 6.35mm
    Ma'auni 4 5.7mm 5.19mm 5.95mm
    Ma'auni 5 5.32mm 4.62mm 5.55mm
    Ma'auni na 6 4.94mm 4.11mm 5.16mm
    Ma'auni 7 4.56mm 3.67mm 4.76mm
    Ma'auni 8 4.18mm 3.26mm 4.27mm 4.19mm
    Ma'auni 9 3.8mm 2.91mm 3.89mm 3.97mm
    Ma'auni 10 3.42mm 2.59mm 3.51mm 3.57mm
    Ma'auni 11 3.04mm 2.3mm 3.13mm 3.18mm
    Ma'auni 12 2.66mm 2.05mm 2.75mm 2.78mm
    Ma'auni 13 2.28mm 1.83mm 2.37mm 2.38mm
    Ma'auni 14 1.9mm 1.63mm 1.99mm 1.98mm
    Ma'auni 15 1.71mm 1.45mm 1.8mm 1.78mm
    Ma'auni 16 1.52mm 1.29mm 1.61mm 1.59mm
    Ma'auni 17 1.36mm 1.15mm 1.46mm 1.43mm
    Ma'auni 18 1.21mm 1.02mm 1.31mm 1.27mm
    Ma'auni 19 1.06mm 0.91mm 1.16mm 1.11mm
    Ma'auni 20 0.91mm 0.81mm 1.00mm 0.95mm
    Ma'auni na 21 0.83mm 0.72mm 0.93mm 0.87mm
    Ma'auni 22 0.76mm 0.64mm 085mm 0.79mm
    Ma'auni 23 0.68mm 0.57mm 0.78mm 1.48mm
    Ma'auni 24 0.6mm 0.51mm 0.70mm 0.64mm
    Ma'auni 25 0.53mm 0.45mm 0.63mm 0.56mm
    Ma'auni 26 0.46mm 0.4mm 0.69mm 0.47mm
    Ma'auni 27 0.41mm 0.36mm 0.51mm 0.44mm
    Ma'auni 28 0.38mm 0.32mm 0.47mm 0.40mm
    Ma'auni na 29 0.34mm 0.29mm 0.44mm 0.36mm
    Ma'auni 30 0.30mm 0.25mm 0.40mm 0.32mm
    Ma'auni 31 0.26mm 0.23mm 0.36mm 0.28mm
    Ma'auni 32 0.24mm 0.20mm 0.34mm 0.26mm
    Ma'auni 33 0.22mm 0.18mm 0.24mm
    Ma'auni 34 0.20mm 0.16mm 0.22mm

    Cikakkun bayanai

    镀锌板_04
    镀锌板_03
    镀锌板_02

    Dekayan ado

    Marufi na yau da kullun donzai iya bambanta dangane da abubuwa da dama, ciki har da masana'anta, girman takardar da kuma yawanta. Duk da haka, yawancin masana'antun galibi suna sanya zanen gado na GI a cikin fakiti, yawanci guda 10 zuwa 100, tare da kowane fakitin a naɗe da madauri na filastik ko ƙarfe don ƙarin kariya yayin jigilar kaya.

    Bugu da ƙari, wasu masana'antun na iya samar da ƙarin kariya ta hanyar sanya fakitin a cikin akwati na katako ko naɗe fakitin a cikin filastik ko kwali. Marufi na iya haɗawa da lakabi ko alamomi waɗanda ke nuna girma, ƙayyadaddun bayanai, da sauran bayanai masu dacewa game da fom ɗin GI.

    Yana da mahimmanci a lura cewa marufi na yau da kullun bazai dace da kowane nau'in jigilar kaya ko ajiya ba, musamman idan zanen gado yana fuskantar yanayi mai tsauri ko rashin kulawa. A irin waɗannan yanayi, ana iya buƙatar ƙarin matakai kamar su shimfiɗa matashin kai, rufi, ko kwantena na musamman don kiyaye lafiyar zanen gado.

    镀锌板_07
    isarwa
    isarwa1
    isarwa2
    镀锌板_08

    Tambayoyin da ake yawan yi akai-akai

    1. Nawa ne farashin ku?

    Farashinmu na iya canzawa dangane da wadata da sauran abubuwan kasuwa. Za mu aiko muku da sabon jerin farashi bayan tuntuɓar kamfanin ku.

    mu don ƙarin bayani.

    2. Shin kuna da mafi ƙarancin adadin oda?

    Eh, muna buƙatar duk oda na ƙasashen duniya su kasance suna da mafi ƙarancin adadin oda. Idan kuna neman sake siyarwa amma a ƙananan adadi, muna ba da shawarar ku duba gidan yanar gizon mu.

    3. Za ku iya samar da takaddun da suka dace?

    Eh, za mu iya samar da mafi yawan takardu, gami da Takaddun Shaida na Bincike / Yarjejeniyar; Inshora; Asali, da sauran takaddun fitarwa inda ake buƙata.

    4. Menene matsakaicin lokacin jagoranci?

    Ga samfura, lokacin jagora yana kimanin kwanaki 7. Don samar da kayayyaki da yawa, lokacin jagora shine kwanaki 5-20 bayan karɓar kuɗin ajiya. Lokacin jagora yana aiki lokacin da

    (1) mun karɓi kuɗin ajiyar ku, kuma (2) muna da amincewar ku ta ƙarshe don samfuran ku. Idan lokacin da muke bayarwa bai yi aiki da wa'adin lokacin da aka ƙayyade ba, da fatan za a sake duba buƙatun ku tare da siyarwar ku. A duk lokuta za mu yi ƙoƙarin biyan buƙatun ku. A mafi yawan lokuta za mu iya yin hakan.

    5. Waɗanne irin hanyoyin biyan kuɗi kuke karɓa?

    Kashi 30% a gaba kafin T/T, kashi 70% za su kasance kafin jigilar kaya akan FOB; kashi 30% a gaba kafin T/T, kashi 70% idan aka kwatanta da kwafin BL basic akan CIF.

  • Na baya:
  • Na gaba:

    • Samfurirukunoni