shafi_banner

Farashin Na'urar GI ta Cold Rolled DX51 Mai Zafi

Sanyi Nadi DX51 Mai Zafi Na Gaske Na Karfe Na GI Nadi Farashin da Aka Fito Hoton da Aka Fito
  • Farashin Na'urar GI ta Cold Rolled DX51 Mai Zafi
  • Farashin Na'urar GI ta Cold Rolled DX51 Mai Zafi
  • Farashin Na'urar GI ta Cold Rolled DX51 Mai Zafi
  • Farashin Na'urar GI ta Cold Rolled DX51 Mai Zafi

Takaitaccen Bayani:

Dominna'urorin galvanized, ana nutsar da ƙarfen takardar a cikin bahon zinc mai narkewa don yin takardar zinc da aka lulluɓe a saman sa. Yawanci ana samar da shi ta hanyar ci gaba da aikin galvanizing, wato, ana nutsar da farantin ƙarfe da aka naɗe a cikin tankin plating tare da zinc da aka narke don yin farantin ƙarfe mai galvanized; farantin ƙarfe mai galvanized da aka haɗa da galvanized. Ana kuma ƙera wannan nau'in farantin ƙarfe ta hanyar tsoma zafi, amma nan da nan bayan an fitar da shi daga tankin, ana dumama shi zuwa kusan 500 ℃ don samar da rufin ƙarfe na zinc da ƙarfe. Wannan murfin galvanized yana da kyakkyawan manne fenti da kuma iya waldawa.


  • Maki:ASTM-A653; JIS G3302; EN10147; da sauransu
  • Fasaha:An tsoma shi da zafi/sanyi birgima
  • Maganin Fuskar:An yi galvanized
  • Faɗi:600-1250mm
  • Tsawon:Kamar yadda ake buƙata
  • Shafi na Zinc:30-600g/m2
  • Ayyukan Sarrafawa:Yankan, Fesawa, Shafi, Marufi na Musamman
  • Lokacin Isarwa:Kwanaki 3-15 (gwargwadon ainihin adadin)
  • Bayanin Tashar Jiragen Ruwa:Tashar jiragen ruwa ta Tianjin, Tashar jiragen ruwa ta Shanghai, Tashar jiragen ruwa ta Qingdao, da sauransu.
  • Sharuɗɗan biyan kuɗi:T/T, Bankin Kunlun,
  • Dubawa:SGS, TUV, BV, duba masana'anta
    • Whatsapp

    Cikakken Bayani game da Samfurin

    Alamun Samfura

    Na'urorin Karfe da aka Galvanized

    Cikakken Bayani game da Samfurin

    Na'urar galvanized, siririn takardar ƙarfe wanda ake tsomawa cikin baho na zinc mai narkewa don sanya saman sa ya manne da wani Layer na zinc. A halin yanzu, galibi ana samar da shi ta hanyar ci gaba da yin galvanization, wato, ana ci gaba da tsoma farantin ƙarfe da aka naɗe a cikin baho tare da zinc mai narkewa don yin farantin ƙarfe mai galvanized;. Ana yin irin wannan farantin ƙarfe ta hanyar amfani da hanyar tsoma zafi, amma ana dumama shi zuwa kusan 500 ℃ nan da nan bayan an fitar da shi daga tanki, don ya samar da rufin ƙarfe na zinc da ƙarfe. Wannan na'urar galvanized tana da kyakkyawan matsewa da kuma sauƙin walda. Ana iya raba na'urorin galvanized zuwa na'urorin galvanized masu zafi da kuma na'urorin galvanized masu zafi da aka yi birgima da sanyi, waɗanda galibi ana amfani da su a gine-gine, kayan aikin gida, motoci, kwantena, sufuri da masana'antu na gida. Musamman ma, ginin tsarin ƙarfe, kera motoci, kera rumbun adana ƙarfe da sauran masana'antu. Bukatar masana'antar gini da masana'antar haske ita ce babbar kasuwar na'urar galvanized, wacce ke da kusan kashi 30% na buƙatar takardar galvanized.

    镀锌卷_12

    Babban Aikace-aikacen

    Siffofi

    wani abu ne na ƙarfe da aka lulluɓe da sinadarin zinc. Wannan tsari, wanda ake kira galvanizing, ana amfani da shi don kare ƙarfen da ke ƙarƙashinsa daga tsatsa da tsatsa, wanda hakan ya sa ya zama abu mafi dacewa don amfani iri-iri. Ga wasu muhimman fasalulluka na na'urorin ƙarfe masu galvanized:

    1. Juriyar tsatsa:yana da ƙarfin juriya ga tsatsa da kuma ƙarfin hana tsatsa. Layin galvanized yana kare ƙarfen da ke ƙarƙashinsa daga iska, danshi, da sauran abubuwa masu lalata, wanda hakan ya sa ya dace a yi amfani da shi a waje ko a cikin yanayi mai danshi.

    2. Dorewa: Rufin zinc da ke kan na'urar ƙarfe mai galvanized shi ma yana taimakawa wajen dorewarsa gabaɗaya, wanda hakan ke sa ya fi jure lalacewa da tsagewa. Wannan ya sa ya zama kayan aiki mai kyau don aikace-aikacen masana'antu da gini inda ƙarfi da tauri suke da mahimmanci.

    3. Kayan kwalliya:suna da kamanni mai haske da sheƙi, wanda hakan ke sa su zama kayan ado masu kyau. Ana iya fenti ko kuma a shafa musu foda a launuka daban-daban, wanda hakan ke sa ya zama mai amfani a aikace-aikacen ƙira iri-iri.

    4. Juriyar Zafi: Na'urorin ƙarfe masu galvanized suma suna da matuƙar juriya ga yanayin zafi mai tsanani, wanda hakan ya sa suka dace da amfani da su a aikace-aikacen zafi mai yawa kamar tanda ko murhu.

    5. Sauƙin Amfani: Na'urar ƙarfe mai galvanized tana da sauƙin amfani da ita saboda tana da sauƙi kuma ana iya ƙirƙirar ta cikin sauƙi ko a yanka ta cikin girman da siffar da ake so. Wannan ya sa ta zama zaɓi mai shahara ga ayyukan DIY da kuma aikace-aikacen masana'antu inda daidaito da inganci suke da mahimmanci.

    6. Mai sauƙin amfani: Na'urorin ƙarfe masu galvanized suma suna da rahusa idan aka kwatanta da sauran ƙarfe da yawa, wanda hakan ya sa suka zama abin sha'awa ga aikace-aikace iri-iri.

    Aikace-aikace

    Ana amfani da kayayyakin ƙarfe masu galvanized a fannin gini, masana'antu masu sauƙi, motoci, noma, kiwon dabbobi, kamun kifi, kasuwanci da sauran masana'antu. Ana amfani da masana'antar gini galibi don kera bangarorin rufin hana lalata da kuma raga na rufin don gine-ginen masana'antu da na farar hula; A masana'antar haske, ana amfani da shi ne don kera harsashin kayan gida, bututun hayaki na farar hula, kayan kicin, da sauransu. A masana'antar motoci, galibi ana amfani da shi ne don kera sassan motoci masu jure tsatsa, da sauransu; Noma, kiwon dabbobi da kamun kifi galibi ana amfani da su ne a matsayin ajiyar abinci da jigilar kayayyaki, kayan aikin sarrafa nama da na ruwa, da sauransu; galibi ana amfani da shi ne don ajiya da jigilar kayayyaki da kayan aikin marufi.

    图片2

     Sigogi

    Sunan samfurin

    Na'urar ƙarfe mai galvanized
    Na'urar ƙarfe mai galvanized ASTM, EN, JIS, GB
    Matsayi Dx51D, Dx52D, Dx53D, DX54D, S220GD, S250GD, S280GD, S350GD, S350GD, S550GD; SGCC, SGHC, SGCH, SGH340, SGH400, SGH440, SGH490,SGH540, SGCD1, SGCD2, SGCD3, SGC340, SGC340, SGC490, SGC570; SQ CR22 (230), SQ CR22 (255), SQ CR40 (275), SQ CR50 (340), SQ

    CR80(550), CQ, FS, DDS, EDDS, SQ CR33 (230), SQ CR37 (255), SQCR40 (275), SQ CR50 (340), SQ CR80 (550); ko Bukatar Abokin Ciniki
    Kauri 0.10-2mm za a iya keɓance shi daidai da buƙatarku
    Faɗi 600mm-1500mm, bisa ga buƙatun abokin ciniki
    Fasaha Na'urar Galvanized mai zafi da aka tsoma
    Shafi na Zinc 30-275g/m2
    Maganin Fuskar Passivation, Oiling, Lacquer sealing, Phosphating, Ba a yi wa magani ba
    saman spangle na yau da kullun, spangle na misi, mai haske
    Nauyin Nauyin Nauyi Tan 2-15 na mita a kowace na'ura
    Kunshin Takardar da ke hana ruwa ta ƙunshi marufi na ciki, an yi mata fenti da ƙarfe mai rufi ko kuma an yi mata fenti da ƙarfe mai rufi, an yi mata fenti da ƙarfe mai kauri, sannan an naɗe ta da ƙarfe mai kauri.bel ɗin ƙarfe bakwai. ko kuma bisa ga buƙatun abokin ciniki
    Aikace-aikace tsarin gini, ƙarfe grating, kayan aiki

     

    Cikakkun bayanai

    镀锌卷_02
    镀锌卷_03
    镀锌卷_04
    镀锌卷_05
    镀锌卷_06
    镀锌卷_07
    Na'urorin Karfe Masu Galvanized (2)
    Na'urorin Karfe Masu Galvanized (3)

    Tambayoyin da ake yawan yi akai-akai

    1. Nawa ne farashin ku?

    Farashinmu yana iya canzawa dangane da wadata da sauran abubuwan kasuwa.

    Za mu aiko muku da sabon jerin farashi bayan kamfanin ku ya tuntube mu don ƙarin bayani.

     

    2. Shin kuna da mafi ƙarancin adadin oda?

    Eh, muna buƙatar duk oda na ƙasashen duniya su kasance suna da mafi ƙarancin adadin oda.

    Idan kuna neman sake siyarwa amma a ƙaramin adadi, muna ba da shawarar ku duba gidan yanar gizon mu

     

    3. Za ku iya samar da takaddun da suka dace?

    Eh, za mu iya samar da mafi yawan takardu, gami da Takaddun Shaida na Bincike / Yarjejeniyar; Inshora; Asali, da sauran takaddun fitarwa inda ake buƙata.

     

    4. Menene matsakaicin lokacin jagoranci?

    Ga samfura, lokacin jagora yana kimanin kwanaki 7. Don samar da kayayyaki da yawa, lokacin jagora shine kwanaki 5-20 bayan karɓar kuɗin ajiya. Lokacin jagora yana aiki lokacin da

    (1) mun karɓi kuɗin ajiyar ku, kuma (2) muna da amincewar ku ta ƙarshe don samfuran ku. Idan lokacin da muke bayarwa bai yi aiki da wa'adin lokacin da aka ƙayyade ba, da fatan za a sake duba buƙatun ku tare da siyarwar ku. A duk lokuta za mu yi ƙoƙarin biyan buƙatun ku. A mafi yawan lokuta za mu iya yin hakan.

     

    5. Waɗanne irin hanyoyin biyan kuɗi kuke karɓa?

    Kashi 30% a gaba kafin T/T, kashi 70% za su kasance kafin jigilar kaya akan FOB; kashi 30% a gaba kafin T/T, kashi 70% idan aka kwatanta da kwafin BL basic akan CIF.

  • Na baya:
  • Na gaba:

    • Samfurirukunoni