Tuntube Mu don samun Sabbin LabaraiNa'urar Karfe Mai Lantarki ta ASTM A677 / A677MBayani dalla-dalla da Girma.
ASTM A677 / A677M Na'urar Karfe Mai Lantarki Mai Sauƙi (NOES) don Manyan Motoci Masu Inganci
| Abu | Bayani |
| Sunan Samfuri | ASTM A677 Silicon Steel Coil |
| Nau'in Karfe | Karfe Mai Lantarki Mara Juyawa (NOES) |
| Tsarin Masana'antu | Mai Sanyi |
| Daidaitacce | ASTM A677 / A677M |
| Mitar Aikace-aikace | 50 / 60 Hz |
| Aikace-aikace na yau da kullun | Motoci, Janareta, Injinan EV Drive, Kayan Aiki |
| Sinadarin | Abubuwan da ke ciki |
| Silikon (Si) | 0.5 – 3.5% |
| Carbon (C) | ≤ 0.005% |
| Sulfur (S) | ≤ 0.003% |
| Nitrogen (N) | Ana sarrafa shi sosai |
| Baƙin ƙarfe (Fe) | Daidaito |
(Ainihin abun da ke ciki na iya bambanta dangane da maki: M150-35A5, M230-35A5, M300-50A5, da sauransu)
| Kadara | Bayani |
| Tsarin Hatsi | Ba a mayar da hankali kan abu ɗaya ba (Halayen maganadisu iri ɗaya a kowane bangare) |
| Asarar Zuciya | Ƙarami zuwa ƙarami sosai (ya dogara da mataki) |
| Na'urar Magnetic Perfusion | Babban |
| Magnetic Induction | Babban (Matsakaicin ƙimar B50 / B25 a kowane aji) |
| Nau'in Shafi | C5 / Rufin da aka rufe yana samuwa |
| Kwanciyar Hankali a Aiki | Madalla a ƙarƙashin yanayin filin maganadisu mai juyawa |
| Kauri (mm) | Aikace-aikacen da Aka saba |
| 0.35 | Injinan masana'antu masu inganci |
| 0.5 | Injinan masana'antu na gabaɗaya |
| 0.65 | Injinan da janareto na yau da kullun |
| Matsayi | Kauri | Amfani na yau da kullun |
| M150-35A5 | 0.35 mm | Injinan IE3 / IE4 masu inganci |
| M230-35A5 | 0.35 mm | Injinan EV / Injinan masana'antu |
| M300-50A5 | 0.50 mm | Injinan da janareto na yau da kullun |
| Kadara | Ƙayyadewa / Kewaya | Bayanan kula / Maki na yau da kullun |
| Kauri (mm) | 0.35 / 0.50 / 0.65 | M150-35A5, M230-35A5, M300-50A5 |
| Juriyar Kauri | ±0.005 mm | Matsayin ASTM A677 |
| Faɗi (mm) | 800 – 1250 | Faɗin yankewa 30–1250 mm yana samuwa |
| Juriyar Faɗi | ±1.0 mm | Gefen Niƙa / Gefen Tsaga |
| Diamita na Ciki na Coil (ID) | 508 mm / 610 mm | Daidaitaccen kayan aiki don sarrafa kayan aiki |
| Diamita na Waje na Coil (OD) | ≤ 1500 mm | Ya dogara da nauyin na'ura |
| Nauyin Nauyin Nauyi | Tan 3 - 8 na Metric | Ana iya keɓancewa |
| Rufin Fuskar | C5 / Rufin da aka rufe | Zaɓi ga kowane buƙata |
| Yanayin Gefen | Gefen Niƙa / Gefen Tsaga | Don lamination da kuma manyan motoci |
| Fom ɗin | Cikakken Nada / Rage Nada / Takardar Yanka-zuwa-Tsawon | Bisa ga buƙatun abokin ciniki |
| Mitar Aikace-aikace | 50 / 60 Hz | Injinan masana'antu, injinan EV, janareto, kayan aikin gida |
| Aiki | Ba a mayar da hankali kan abu ɗaya ba (halayen maganadisu iri ɗaya) | Ƙarancin asarar core, babban permeability |
Danna maɓallin da ke kan dama
1. Na'urorin Canza Wutar Lantarki:ASTM A677 ba tare da la'akari da shi bazanen gado na silicon steelSaboda kyawawan halayensu kamar ƙarancin ƙarfe da kuma yawan amfani da shi, ana amfani da su sosai a cikin ƙwanƙolin wutar lantarki, suna rage asarar da ba ta da kaya sosai da kuma inganta ingancin makamashi.
2. Na'urorin Canza Rarrabawa:An tsara su musamman don ci gaba da aiki da na'urorin rarraba wutar lantarki, suna da kyawawan halayen maganadisu, ƙarancin samar da zafi, da kuma tsawon rai na aiki.
3. Na'urorin Canzawa na DC Masu Inganci Masu Inganci na AI:Biyan buƙatun cibiyoyin bayanai masu girman gaske, ƙarancin asarar ƙarfe da yawan kwararar maganadisu suna da matuƙar muhimmanci don rage ɓarnar makamashi da kuma kiyaye daidaiton wutar lantarki.
4. Reactors da Inductors:Masu amsawa da inductor suna buƙatar ƙarfin ƙarfin maganadisu na alkibla da kuma aiki mai karko a filayen maganadisu na AC.
5. Na'urorin Canza Masana'antu na Musamman:Na'urorin canza wutar lantarki na masana'antu masu amfani da mai da busasshiyar na'ura na iya biyan buƙatunku na aminci a cikin masana'antu, makamashi mai sabuntawa, da ayyukan ababen more rayuwa.
1) Ofishin Reshe - Tallafin da ake bayarwa ga masu magana da Sifaniyanci, taimakon share kwastam, da sauransu.
2) Sama da tan 5,000 na kaya a hannun jari, tare da nau'ikan girma dabam-dabam
3) Ƙungiyoyi masu iko kamar CCIC, SGS, BV, da TUV sun duba su, tare da marufi na yau da kullun masu dacewa da ruwa.
- Fasallolin Marufi
Kariyar Naɗi: Ciki na ciki yana amfani da bututun ƙarfe ko takarda, tare da faranti masu kariya daga gefe ko ƙarfe masu kusurwa; saman an rufe shi da takarda mai hana danshi ko fim ɗin PE, kuma maganin mai na hana tsatsa zaɓi ne.
Hanyar Tsaro: Ana amfani da madaurin ƙarfe mai ƙarfi don ɗaurewa; ana sanya fale-falen katako ko tire idan ya cancanta.
Haɗawa (Zaɓi): Za a iya haɗa siririn biredi a cikin biredi da yawa, tare da takardar rabawa don hana karcewa, da kuma fim ɗin filastik na waje don kariya.
- Hanyoyin Sufuri
Jirgin Ruwa: Kwantena masu tsawon ƙafa 20/ƙafa 40, an ɗaure su da sandunan katako don hana motsi.
Kaya a Ƙasa: Motar jigilar kaya ko ta jirgin ƙasa mai faɗi, an ɗaure ta da sarƙoƙi ko maƙallan ƙarfe.
- Sarrafawa da Ajiya
Yi amfani da ƙugiya mai murfi, kayan aikin ɗagawa, ko firam ɗin C don guje wa jawowa.
Dole ne a ajiye biredi a tsaye, daga ƙasa, don hana lalacewa ko tsatsa.
A kiyaye a bushe kuma a sami isasshen iska; a guji taruwa a wuri mai tsayi.
Haɗin gwiwa mai ƙarfi tare da kamfanonin jigilar kaya kamar MSK, MSC, COSCO, sarkar sabis na jigilar kaya, da sarkar sabis na jigilar kaya, mu ne abin da kuke gamsuwa da shi.
Muna bin ƙa'idodin tsarin kula da inganci na ISO9001 a duk matakai, kuma muna da cikakken iko tun daga siyan kayan marufi har zuwa jadawalin jigilar ababen hawa.
1. Menene na'urar ASTM A677 / A677M wacce ba ta da alaƙa da ƙarfe mai amfani da wutar lantarki?
Na'urar ƙarfe mara amfani da wutar lantarki nau'in ƙarfe ne na silicon wanda ke da ƙarfin maganadisu mai kyau da ƙarancin asarar ƙarfe. Yana gudanar da aiki iri ɗaya a kowane bangare kuma ana amfani da shi sosai a cikin kayan aikin lantarki kamar su na'urorin canza wutar lantarki, injina, da janareta.
2. Menene kauri da faɗi na gama gari?
Kauri: Yawanci 0.27 mm, 0.30 mm, 0.35 mm, da sauransu. (ana iya keɓancewa idan an buƙata)
Faɗi: 600 mm ~ 1250 mm (akwai gyare-gyare)
3. Waɗanne hanyoyin maganin saman jiki ne?
Maganin varnish mai rufi (rufin saman): Ana amfani da shi don rage asarar wutar lantarki.
Rufin mai da ke hana tsatsa: Yana hana iskar shaka yayin jigilar kaya da ajiya.
Takardar kariya ta VCI ko marufi na fim ɗin PE: Mai hana danshi da kuma hana tsatsa.
4. Waɗanne hanyoyi ne ake amfani da su wajen marufi?
An yi tsakiyar kowace na'ura da bututun ƙarfe ko takarda.
An ɗaure gefunan da aka birgima da kariyar kusurwa da kuma sandunan ƙarfe.
An naɗe saman waje da takarda mai hana danshi ko fim ɗin filastik. Ana iya haɗa ƙananan na'urori cikin saiti.
5. Menene bambance-bambance tsakanin ASTM A677/A677M da sauran ƙa'idodin ƙarfe na lantarki?
Ba a mayar da hankali kan komai ba (NO): Halayen maganadisu iri ɗaya, aiki mai daidaito a kowane bangare.
Mai Daidaitawa (GO): Manyan halayen maganadisu a gefen birgima, galibi ana amfani da su a manyan na'urori masu canza wutar lantarki.
ASTM A677/A677M ya fi mai da hankali kan kayan lantarki da na inji, waɗanda suka dace da injina da kayan aikin masana'antu gabaɗaya.
6. Shin ana iya keɓancewa?
Eh, ana iya keɓance kauri, faɗi, nauyin na'ura, maganin saman, da marufi bisa ga buƙatun abokin ciniki.
7. Ta yaya ake tabbatar da inganci?
Ana yin aikin ne bisa ƙa'idodin ASTM A677/A677M.
Kowace rukunin na'urorin ƙarfe suna da lambar ƙimar zafi/baki don ganowa.
Ana samun rahotannin dubawa na ɓangare na uku (kamar SGS, BV).
Cikakkun Bayanan Hulɗa
Adireshi
Yankin masana'antar ci gaban Kangsheng,
Wuqing gundumar Tianjin, kasar Sin.
Awanni
Litinin-Lahadi: Sabis na awanni 24
-
ASTM A36 Gina Jirgin Ruwa Mai Zafi Na Karfe Faranti S ...
-
Babban Ingancin EU Standardrad S460QL/S550QL/S690QL H...
-
Tallace-tallace Masu Zafi Duk Nau'in Takardar Karfe Tarin Hot Roll...
-
ASTM A283 Tsarin Karfe Faranti/Takarda - Mafi kyau ...
-
Yarjejeniyar Kai Tsaye Z Nau'in Karfe Tarin Tarin Gasasshen...
-
Bututun ASTM A671 CC65 CL 12 EFW na Masana'antu...
