Tuntube Mu don ƙarin bayani game da girman
Bututun Karfe na API 5CT N80 na Man Fetur don Man Fetur da Iskar Gas na Malaysia da Ayyukan Gidaje
| Sigogi | Ƙayyadewa |
| Sunan Samfuri | Bututun Man Fetur na API 5CT N80 |
| Daidaitacce | API 5CT |
| Karfe Grade | N80 |
| Matakin Ƙayyadewa | PSL1 / PSL2 |
| Nisan Diamita na Waje | 4 1/2" – 20" (114.3 mm – 508 mm) |
| Kauri a Bango | SCH 40, SCH 80, SCH 160, XXH ko API kauri na musamman |
| Tsarin Masana'antu | Bututun Karfe Mara Sumul, Akwatin Ƙarfi Mai Matsakaici, Akwatin Karfe Mai Mai da Iskar Gas |
| Nau'in Ƙarshe | Ƙarshen da ba a iya gani ba (PE), Zare da Haɗawa (TC), Zare (Pin da Akwati) |
| Nisan Tsawon | 5.8 m – 12.2 m (Ana iya gyara shi) |
| Hulunan Kariya | Murfin Roba / Murfin Roba / Murfin Katako |
| Maganin Fuskar | Na halitta, An yi fenti da fenti, Baƙi, Man Hana Tsatsa |
| Zaɓuɓɓukan Shafi | FBE, 3PE (3LPE), 3PP, CWC (An rufe da nauyin siminti), CRA Clad ko Lined |
| Aikace-aikace | Hako Mai da Iskar Gas, Sufurin Mai, Rufin Rijiyar Mai, Gina Tushen Gida |
| Matsayi | C (Kabon) | Mn (Manganese) | P (Fosphorus) | S (Silfur) | Si (Silikon) | Cr (Chromium) | Mo (Molybdenum) | Ni (Nickel) | Cu (Tagulla) | Bayani |
| N80 | 0.33 mafi girma | Matsakaicin 1.40 | matsakaicin 0.035 | matsakaicin 0.035 | 0.35 mafi girma | – | – | – | – | Ƙarfin matsakaici, rijiyoyi masu zurfi |
| Matsayi | Ƙarfin Yawa (YS) | Ƙarfin Yawa (YS) | Ƙarfin Taurin Kai (TS) | Ƙarfin Taurin Kai (TS) | Bayani |
| ksi | MPa | ksi | MPa | ||
| N80 | 80 | 550 | 95–115 | 655–795 | Ƙarfin matsakaici, rijiyoyi masu zurfi |
Jadawalin Girman Tube na Karfe mara Sumul API 5CT T95
| Diamita na Waje (in / mm) | Kauri a Bango (a/mm) | Jadawali / Nisa | Bayani |
| 4 1/2" (114.3 mm) | 0.337" – 0.500" (8.56 – 12.7 mm) | SCH 40, SCH 80, XXH | Daidaitacce |
| 5" (127.0 mm) | 0.362" – 0.500" (9.19 – 12.7 mm) | SCH 40, SCH 80, XXH | Daidaitacce |
| 5 1/2" (139.7 mm) | 0.375" – 0.531" (9.53 – 13.49 mm) | SCH 40, SCH 80, XXH | Daidaitacce |
| 6 5/8" (168.3 mm) | 0.432" – 0.625" (10.97 – 15.88 mm) | SCH 40, SCH 80, XXH | Daidaitacce |
| 7" (177.8 mm) | 0.500" – 0.625" (12.7 – 15.88 mm) | SCH 40, SCH 80, XXH | Daidaitacce |
| 8 5/8" (219.1 mm) | 0.500" – 0.750" (12.7 – 19.05 mm) | SCH 40, SCH 80, XXH | Daidaitacce |
| 9 5/8" (244.5 mm) | 0.531" – 0.875" (13.49 – 22.22 mm) | SCH 40, SCH 80, XXH | Daidaitacce |
| 10 3/4" (273.1 mm) | 0.594" – 0.937" (15.08 – 23.8 mm) | SCH 40, SCH 80, XXH | Daidaitacce |
| 13 3/8" (339.7 mm) | 0.750" – 1.125" (19.05 – 28.58 mm) | SCH 40, SCH 80, XXH | Daidaitacce |
| 16" (406.4 mm) | 0.844" – 1.250" (21.44 – 31.75 mm) | SCH 40, SCH 80, XXH | Daidaitacce |
| 20" (508 mm) | 1.000" - 1.500" (25.4 - 38.1 mm) | SCH 40, SCH 80, XXH | Daidaitacce |
Danna maɓallin da ke kan dama
PSL1 = Matakin asali, ya dace da rijiyoyin mai na yau da kullun, tare da ƙarancin tsauraran buƙatun gwaji da sarrafawa da ƙarancin farashi.
PSL2 = Babban mataki, ana amfani da shi don rijiyoyin mai a cikin mawuyacin yanayi, tare da ƙarin buƙatu masu tsauri don abubuwan da ke cikin sinadarai, halayen injina, da kuma kula da inganci.
| Fasali | PSL1 | PSL2 |
| Sinadarin Sinadarai | Ikon asali | Matsakaici mai ƙarfi |
| Kayayyakin Inji | Matsakaicin yawan amfanin ƙasa & tensile | Tsanani da ƙarfi |
| Gwaji | Gwaje-gwaje na yau da kullun | Ƙarin gwaje-gwaje & NDE |
| Tabbatar da Inganci | Babban QA | Cikakken bin diddigi da kuma cikakken QA |
| farashi | Ƙasa | Mafi girma |
| Aikace-aikacen da Aka saba | Rijiyoyin yau da kullun | Rijiyoyi masu zurfi, masu matsin lamba mai yawa, masu zafi sosai |
Takaitaccen Bayani:
Ana amfani da bututun ƙarfe mara sulke na API 5CT T95 musamman wajen gudanar da ayyukan rijiyoyin mai da iskar gas inda ƙarfi, tauri, da aminci suke da matuƙar muhimmanci.
| Yankin Aikace-aikace | Bayani |
| Rijiyar Mai da Iskar Gas | Ana amfani da shi azaman kabad mai ƙarfi ga rijiyoyi masu zurfi da zurfi sosai don tallafawa amincin rijiyoyin ruwa a ƙarƙashin matsin lamba mai yawa da zafin jiki. |
| Bututun Mai & Iskar Gas | Yana aiki a matsayin bututun samarwa don fitar da mai da iskar gas, yana tabbatar da aminci da ingantaccen jigilar ruwa. |
| Ayyukan hakowa | Yana tallafawa haƙa rijiyoyi a cikin mawuyacin yanayi, gami da rijiyoyin mai matsin lamba da zafi mai yawa (HPHT). |
| Rijiyoyin Ruwa Mai Zurfi & Na Ƙasashen Waje | Ya dace da amfani da ruwa mai zurfi da na ƙasashen waje saboda ƙarfin juriya da juriyar tsatsa. |
| Rijiyoyin Matsi Mai Girma da Zafi Mai Girma | Ya dace da yanayi mai tsauri inda bututun da aka saba amfani da su ba zai iya jure matsin lamba da zafin jiki na injiniya ba. |
SHIRYA KAN KAYAN DANYEN
Zaɓin billets masu inganci na ƙarfe mai carbon.
Tabbatar da sinadaran da aka haɗa domin cika buƙatun matakin T95.
DUMA
Ana dumama billets a cikin tanderu zuwa yanayin zafin da ya dace (yawanci 1150-1250°C).
HAWA & BIRRING
Ana huda billets masu zafi don samar da harsashi mara zurfi.
Sannan ana birgima harsashi ta amfani da injin niƙa bututu mara sumul don cimma diamita na waje da kauri na bango da ake so.
GIRMAN GIRMA & MAKAƊA
Ana ratsa bututu ta cikin injinan niƙa masu rage shimfiɗawa don dacewa da daidaiton juriyar OD da kauri na bango.
MAGANIN ZAFI
Kashewa da dumamawa don cimma buƙatun injiniya (ƙarfin tensile, ƙarfin samarwa, tauri, da tauri).
MADAIDAI DA YANKA
Ana miƙe bututun kuma a yanka su zuwa tsayin da aka saba (mita 6-12) ko tsayin da abokin ciniki ya ƙayyade. Ana haɗa haɗin kai na musamman (NC, LTC, ko zare na musamman) idan ana buƙata.
Gwaji Mara Lalatawa (NDT)
Hanyoyi kamar gwajin ultrasonic (UT) da duba barbashi na maganadisu (MPI) suna tabbatar da ingancin tsarin da bututun da ba su da lahani.
MAKUNKULA DA JIRGIN SAUYA
Ana haɗa bututun, an kare su da murfin hana lalata, sannan a saka su a cikin akwati (sun dace da jigilar kaya ko jigilar kaya mai yawa).
Kayayyaki masu yawa:Muna da tarin kayayyaki da kuma tsarin samar da kayayyaki masu inganci, wanda hakan ke ba mu damar mayar da martani cikin sauri ga umarninku da kuma tabbatar da ci gaban ayyukanku cikin kwanciyar hankali.
Marufi Mai Aminci:Kowace bututun ƙarfe ana rufe ta da yadudduka da yawa na kumfa sannan a saka jakar filastik ta waje don tabbatar da cewa ba ta lalace ko lalacewa ba yayin jigilar kaya, don haka ana tabbatar da amincin samfurin.
Isarwa Mai Sauri da Inganci:Tare da ingantaccen tallafin kayayyaki, za mu iya isar da kayayyaki zuwa kasuwannin duniya cikin aminci da kuma cikin lokaci bisa ga jadawalin aikinku.
Marufi Mai ƙarfi na Fitar da Kaya
Bututun mu masu sumul na api 5ct an lulluɓe su da kyau a cikin fale-falen katako masu takardar shaida ta IPPC waɗanda suka bi ƙa'idodin shigo da kaya da keɓewa na Malaysia. Kowace fakiti an naɗe ta da kariyar hana ruwa shiga bututun don jure yanayin zafi mai danshi na Malaysia. Bugu da ƙari, ana amfani da murfin ƙarshen filastik ko ƙarfe don hana ƙura, danshi, da tarkace shiga bututun yayin jigilar kaya. Kowace fakiti yawanci tana da nauyin tan 2-3, wanda hakan ke sa ta zama mai sauƙi don saukewa ta amfani da forklifts ko cranes da aka saba amfani da su a wuraren gini da tashoshin jiragen ruwa na Malaysia.
Zaɓuɓɓukan Tsawon Mai Sauƙi
Tsawon bututun ƙarfe na api mai girman 5ct na yau da kullun shine mita 12, wanda aka inganta don jigilar kwantena. Don biyan buƙatun sufuri na gida da buƙatun aiki a Malaysia, muna kuma samar da tsayin da aka keɓance kamar mita 10 ko mita 8, waɗanda suka fi sauƙi a jigilar su ta hanyar babbar mota zuwa filayen mai, wuraren gini, da ayyukan ababen more rayuwa.
Cikakken Takardu & Tallafin Fitarwa
Muna samar da cikakkun takardu na fitarwa don tabbatar da ingantaccen share kwastam a Malaysia, gami da:
Takardar Asali (Form E ko CO na yau da kullun)
Takardar Shaidar Gwajin Mill (MTC)
Rahoton Dubawa na SGS / na Wasu
Jerin Shiryawa
Rasidin Kasuwanci
Idan akwai wani takardu da ke buƙatar gyara, ƙungiyarmu za ta sake duba ta kuma sake aika ta cikin awanni 24 don guje wa jinkirin share kwastam.
Jigilar Kaya da Jigilar Kaya Masu Inganci
Bayan an ƙera, ana jigilar kayan ta hanyar amintattun abokan jigilar kaya na ƙasashen duniya ta hanyar jigilar kaya ta teku. Lokutan sufuri na yau da kullun sun haɗa da:
China → Port Klang, Malaysia: ~ 10-12 kwanaki
China → Tashar jiragen ruwa ta Penang: ~ Kwanaki 10–13
China → Johor Port (Pasir Gudang): ~9-12 kwanaki
Muna kuma tallafawa isar da kayayyaki daga tashar jiragen ruwa zuwa aiki, muna aiki tare da abokan hulɗar jigilar kayayyaki na ƙasar Malaysia don tabbatar da ingantaccen sufuri daga tashar jiragen ruwa zuwa filayen mai da iskar gas, ayyukan ababen more rayuwa, ko wuraren gini.
1. MeneneAPI 5CT?
API 5CT ita ce ma'aunin masana'antu don magudanar ruwa da bututun mai, yana ƙayyade abubuwan da ke cikin sinadarai, halayen injiniya, da girman bututun ƙarfe da ake amfani da su a cikin rijiyoyin mai da iskar gas.
2. Menene shahararrun ma'aunin casing da bututun API 5CT?
Maki na yau da kullun sune J55, K55, N80, L80, C90, da P110, duk sun bambanta da juna dangane da ƙarfi da kuma fannin aikace-aikacen kamar haka:
J55 / K55: Ƙarfin da ba shi da ƙarfi, ga rijiyoyin da ba su da zurfi.
N80 / L80: Ƙarfin matsakaici ga rijiyoyi masu zurfi, mafita masu jure tsatsa don L80.
C90 / P110: Ƙarfi mai yawa, matsin lamba mai yawa da kuma rijiyoyi masu zurfi.
3. Menene amfanin da ake amfani da shi a kowane aji?
J55 / K55: Ƙarancin matsin lamba, aikace-aikacen rijiyoyin da ba su da zurfi.
N80 / L80: Rijiyoyin mai zurfi zuwa matsakaici, matsin lamba mafi girma; L80 don muhallin CO₂/H₂S.
C90 / P110: Rijiyoyi masu zurfi, masu matsin lamba mai yawa, da kuma aiki mai tsanani.
4. Shin waɗannan bututun suna da santsi ko kuma suna da walda?
Bututun API 5CT da casing galibi ba su da matsala (SMLS), don samar da juriya ga matsin lamba mai yawa, amma akwai wasu samfuran da aka keɓance na musamman.
5. Zan iya amfani da bututun API 5CT a yanayin tsatsa?
Eh. Ana iya isar da maki L80, C90 da P110 a matsayin CI (ƙarfe mai juye da turɓaya (CRS)) don muhallin H₂S, CO₂ ko mai yawan chloride.
6. Ta yaya ake gwada bututun API 5CT?
Domin biyan buƙatun API 5CT, suna gudanar da gwaje-gwajen injiniya da yawa (tensile, reduction, elongation), sinadarai da NDE (Non-Destructive Examination) kamar gwajin UT ko MPI.
Cikakkun Bayanan Hulɗa
Adireshi
Yankin masana'antar ci gaban Kangsheng,
Wuqing gundumar Tianjin, kasar Sin.
Awanni
Litinin-Lahadi: Sabis na awanni 24
-
Babban ƙarfi na Wear mai juriya Standard Seaworth ...
-
JIS G3466 STK400/STK500 Murabba'in Tube Kuma Ramin ...
-
ASTM A53 Gr.B Bututun Carbon da aka welded don Ruwa ...
-
Karfe Mai Inganci da Ƙarancin Farashi SY295 SY390 AZ...
-
ASTM A36 Angle Karfe | Farfesa Tsarin Amurka...
-
Zafi birgima ASTMA53-2005 A53 HSS Baƙin ƙarfe Kafet...
